FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: Harv on June 02, 2011, 05:55:19 AM



Title: FB/EK Holden NASCO oil filter enthusiasts guide
Post by: Harv on June 02, 2011, 05:55:19 AM
Ladies and Gents,

As promised, please find below the first pass of the FB/EK Holden Nasco oil filter enthusiasts guide. I've written it with FB/EK's in mind, though the info is 99% valid for FE/FCs. I owe thanks to quite a few guys from this forum for help - thankyou!

This document aims to provide some information regarding the NASCO oil filters fitted to FB and EK Holdens. It contains
 :) historical information, such as which filters were advertised for different model Holdens,
 :) practical information on identification, disassembly and reassembly of FB and EK Holden filters,
 :) guidance on replacement parts and overhaul techniques, and
 :) some explanations on full-flow filtration.

It contains answers to many of the questions that seem to come up routinely on most of the early Holden forums:
“Where do I connect the hoses to?”
“What filter cartridge can I use?”
“Can I convert my grey motor to full-flow filtration?”

http://www.scribd.com/fullscreen/56830215?access_key=key-1e6pc13gvi0gfjj7wqjv

Happy to recieve any feedback for changes or ammendments.

Cheers,
Harv (chief apprentice oil filter fiddler).