Text only | Text with Images

FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: FE 4 ME on April 01, 2011, 08:28:03 PM

Title: Primary Arm For Delco EK Wiper Motor
Post by: FE 4 ME on April 01, 2011, 08:28:03 PM
Hi All,

  Hope someone can help, im looking for the primary arm that attaches to a Delco EK Wiper Motor

Im also missing the clips and circlips, basically i have the motor and plate, the wiper arms but not the primary arm with clips/pins and circlip that connect them both together

anyone out there have these or any advise on where to get them or can make them up ??

your help would be greatly appreciated

"Have a Great Holden ( FE ) Day !!! "  :D :D :D

FE 4 ME


Title: Re: Primary Arm For Delco EK Wiper Motor
Post by: earlyholdenfan on April 02, 2011, 09:10:42 AM
Hi FE4ME

I have a few laying around, you can have for nix
will shoot you a PM to sort it out

Matt
Title: Re: Primary Arm For Delco EK Wiper Motor
Post by: FE 4 ME on April 02, 2011, 10:07:05 AM
You Guys and this Forum honestly ROCKS !!

amazing how open and generous some people can be..it's rare i tell you...rare indeed !!!


there has been 2 most important things i have done when i got my FE

1. Join this Forum

2. Join the QLD FE/FC Holden Club

both have shown me the respect and openess towards each other

i dont want to go on... but THANKX GUYS !!!


" Indeed Have A Great Holden ( FE ) Day !!! "  :D :D :D

FE 4 ME
Title: Re: Primary Arm For Delco EK Wiper Motor
Post by: FE 4 ME on April 03, 2011, 09:42:01 PM
Hi again,
           can someone tell me if a standard FE/FC wiper switch will suit a single speed Delco wiper motor ?? Does the FE/FC switch have water washer option ? and is the EK switch similar looking to the FE/FC switch ?

Thankx in advance

"Have a Great Holden ( FE ) day !!!"  :D :D :D


FE 4 ME
Title: Re: Primary Arm For Delco EK Wiper Motor
Post by: mcl1959 on April 03, 2011, 10:21:29 PM
No you need to get an electric switch - any switch from EK to EH will do. The FE FC original switch is a cable which opens and closes a vacuum valve on the wiper motor.

Ken
Title: Re: Primary Arm For Delco EK Wiper Motor
Post by: FE 4 ME on April 03, 2011, 10:26:34 PM
Thankx Ken,

wasnt sure.. i did realise there was a cable for the vacuum, but wasnt sure..so i thought best to ask...thankx

and of course the Guru of FE/FC's answers the question with great knownledge, as always !!

FE 4 ME
Title: Re: Primary Arm For Delco EK Wiper Motor
Post by: FCRB26 on April 04, 2011, 04:57:40 AM
FE 4 Me there has been a few posts on this i use a FC headlight switch with a resistor on the parkers to make them 2sp for NSW engineering but if you are happy with single speed just use a headlight switch.



Too easy.


Pete
Title: Re: Primary Arm For Delco EK Wiper Motor
Post by: FE 4 ME on April 04, 2011, 07:34:39 AM
Thankx fchoon,
          thats sounds great, i will search the forum for this info tonight, turn a single speed into 2 speed sounds the go... hopefully the info has the wiring set up

thankx for letting me know

"Have a Great Holden ( FE ) Day !!!"   :D :D :D

FE 4 ME
Title: Re: Primary Arm For Delco EK Wiper Motor
Post by: FE 4 ME on April 12, 2011, 12:06:13 PM
PM sent Greg...thankx very much appreciated


"Have a Great Holden ( FE ) Day !!!"  :D :D :D

FE 4 ME
Text only | Text with Images