|
Title: Rust repairs Post by: Gordon on March 19, 2011, 08:36:01 PM Hi all,Two queries does any one in the Sydney area do rust repairs, not sure if i what to have ago would like it done properly so it doesn't return in a few years,second has any used the gasless mig wire to do rust repairs and is it alright ?
Thanks Gordon Title: Re: Rust repairs Post by: fink fc on March 21, 2011, 05:32:55 PM HEYGORDY.BEEN WELDING SINCE I WAS 16.I BOUGHT A MIG OFF EBAY ABOUT 9 MONTHS AGO,ITS A MARS200 GAS/GASSLESS ,IT WELDS AND WORKS FINE WITHOUT GAS.THE UNIT IS MADE IN ITALY,THE WIRE TO USE YOU CAN GET FROM YOUR LOCAL WELDING SUPPLIER.CIG ETC OK. ITS A SMALL SPOOL AND ITS ALSO MADE IN ITALY.DISCARD THE WIRE IN THIS UNIT ITS RUBBISH OK.THE IMPORT COMPANY I USED IS IN VIC,BUT IM SURE YOU WILL FIND 1 IN YOUR STATE TO.IF YOU ARE A GENUINE''CAR GUY'' THEN I SUGGEST YOU TAKE A TAFE COURSE OK .TAKE YOUR WELDING SERIOUS OK.THE UNIT WAS $400,BACK THEN.HOPE THIS HELPS.
|