Hi,
The Old girl's got a terrible rattling sort of squeak coming from the front end as I cruise down the main drag (on the way to work, of course! ;) ) If I put a little bit of pressure on the brakes the noise disappears. It's a HR front end, new pads, machined discs, "rattle" pins are there. The wheel bearings have been checked and everything else seems as good as gold.
Any ideas?
Pete :)
Peter
The original HR Discs had a steel shim that went between each brake pad and caliper piston to minimise rattle and squeal. Even with these fitted they sometimes still played up. I suggest using a good anti squeal /anti rattle glue specifically for disc brakes which usually stops the problem by glueing the pads to the piston and providing a rubberised cushion. Both Loctite and PBR put out good products for this purpose.
Hope this helps
Cheers
Jock
Thanks again Jock, I'll try the stuff you recommended.
(I hope I don't drive you round the twist before I get this car sorted out!)
Pete :)