Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: smithy on January 19, 2011, 07:00:24 PM

Title: Ceramic coating
Post by: smithy on January 19, 2011, 07:00:24 PM
Does anyone have any idea on the cost of getting a set of headers for a six ceramic coated and where did people go?

Thanks
Dean
Title: Re: Ceramic coating
Post by: FC427 on January 19, 2011, 09:34:59 PM
Hi Octane Performance coatings  02 96384643 do a nice job or Jet Hot coatings  but  steer clear of the mob  in Smithfield  NSW .......FC427.....
Title: Re: Ceramic coating
Post by: smithy on January 19, 2011, 10:42:11 PM
Cheers mark, will give them a call tomorrow.
Title: Re: Ceramic coating
Post by: CraigA on January 19, 2011, 11:12:22 PM
Agree with Mark, Hi Octane are around the corner from my work and did a great job on my HM Headers.

$280.00 and a few days but be careful as they discoloured, or at least lost their sheen, when I ran my cam in.

Here's a picture when they were first done.

(http://i160.photobucket.com/albums/t167/70XU1/26112009138-1.jpg)

Text only | Text with Images