Text only | Text with Images

FE-FC Holden Discussion Forum

For Sale and Wanted => Reproduction Parts => Topic started by: Gordon on November 11, 2010, 04:07:04 PM

Title: Rust repair section
Post by: Gordon on November 11, 2010, 04:07:04 PM
Hi all can you get front guard lower 1/4 sections anywhere ?
Thanks Gordon
Title: Re: Rust repair section
Post by: Rusty_T on November 11, 2010, 06:41:57 PM
Gordon,

Try Rare Spares. Failing that try Spectrum at Dunheved (Near Penrith.) I have a phone # at home. I'll put it up here Tonight, If I remember.

Cheers Rusty
Title: Re: Rust repair section
Post by: hawk on November 11, 2010, 07:24:07 PM
Gordon,
Try this place if you have no luck at Rares.

http://www.retrorods.net.au/index.html
Title: Re: Rust repair section
Post by: Glenn 'Stinky' Stankevicius on November 11, 2010, 07:35:08 PM
Waddington Street Rods? http://stores.ebay.com.au/WADDINGTONS-STREET-RODS

There was also a place in Qld I think that was doing repro rust repair sections.
Title: Re: Rust repair section
Post by: Ol_Girl_58 on November 11, 2010, 08:12:45 PM
Craig Vayne Sheetmetal Fabrication (Rust a Problem?) also sell them - $44.

http://www.rustaproblem.com.au/holden.htm

Kind regards,

Ol_Girl_58
Title: Re: Rust repair section
Post by: Ol_Girl_58 on November 11, 2010, 08:14:23 PM
^^^

I reckon this would be the Queensland crowd you're thinking of, Stinky  :)
Title: Re: Rust repair section
Post by: Glenn 'Stinky' Stankevicius on November 11, 2010, 08:22:14 PM
That's them  ;)
Title: Re: Rust repair section
Post by: Gordon on November 12, 2010, 06:49:25 PM
Hi thanks,no longer available from rare spares will try the others
Thanks Gordon
Title: Re: Rust repair section
Post by: GMHwagoon on November 12, 2010, 10:07:17 PM
make sure they are fe fc not fb ek
Title: Re: Rust repair section
Post by: Geobarb Agencies on November 21, 2010, 11:15:58 PM
I also have them. Made by the factory that supplies most of the big parts companies in Australia. Geobarb Agencies handle the retail/trade sales on Ebay.
Check my feedback on ebay.
Kind regards to all.
Title: Re: Rust repair section
Post by: thecanoeguy on May 22, 2014, 11:34:59 AM
hello
do you still have rust repair sections available for fc's
Title: Re: Rust repair section
Post by: fink on May 23, 2014, 08:35:00 AM
I get all my stuff from Craig Vayne,it's a thicker gauge than Rares,you can order it without primer also,i've never had a problem with fitting!Gaz! :-*
Title: Re: Rust repair section
Post by: TTV6FC on May 23, 2014, 10:03:35 PM
The lower quarter sections from Craig Vane are to suit FB-EK and are different (although advertised as to fit FE-FC as well) as shown in my thread as I ordered a set from him a couple years ago.That is of course unless he has now changed the profile.Cheers,Jamie.
Text only | Text with Images