any done mini tubs here in W.A
are they allowed etc
thanks
'mini' tubs are usually tubs which don't involve any mods to the subframe or chassis rails. in which case they are legal in all states.
thanks
will have to move the chassis then
as 295,s wont fit.....
yeah i unpicked my rails 3 inch each inboard to fit 10in rim and 305s
Same here, moved rails 4", fit 305 on a 10" rim with 3.5 " backspace
cheers brett
What would be the largest size tyre rim combo with mini tubs with no rail modifications .... ??? ???.
Fc427,
I have 245x40x18 fitted.
Regards Brett
Brett F
Have you just fitted squared off tubs without rail mods.
I ran 225s with no mods and they rubbed now im running the motor i am i need more rubber but didnt want to risk doing the whole moving the rails in thing.
245s should be enough without compromising the back seat too much.
fchoon,
yes, the rails are in the normal position and the tubs start at the actual rail. No flares or lipping of the guard edges.
Regards Brett
i have 245 on there now....
and photos of the moving rails please....
easy???
I have some photos of what I went through moving the rails and tubbing the ute... maybe that will help you.
Its under 365 days in the project car section.
Cheers
Jb
thanks lads
Quote from: fevanv6 on September 15, 2010, 02:07:32 PM
I have some photos of what I went through moving the rails and tubbing the ute... maybe that will help you.
Its under 365 days in the project car section.
Cheers
Jb
is your ute finnished???
No, progress stopped about a year ago due to work moving me to a different state. But the car an myself are now re acquainted so will be starting on it again probably next month.
The pictures will start again shortly after.
Cheers
JB
look forward to it ..great work...