Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: Don on June 08, 2010, 05:37:45 PM

Title: Horn Button/Bonnet Emblem
Post by: Don on June 08, 2010, 05:37:45 PM
Is the horn button & round bonnet emblem on a Fe Ute the same ?
Title: Re: Horn Button/Bonnet Emblem
Post by: Stewy on June 08, 2010, 05:45:56 PM
 
No sorry they are not the same, Rare Spares do a good repro of the horn button, but as yet dont do the front bonnet emblem.
Cheers stewy.
Title: Re: Horn Button/Bonnet Emblem
Post by: Don on June 08, 2010, 05:49:26 PM
Thanks Stewy Will have to keep looking
Title: Re: Horn Button/Bonnet Emblem
Post by: Just40 on June 08, 2010, 05:51:00 PM
horn button + bench grinder = bonnet emblem.
Title: Re: Horn Button/Bonnet Emblem
Post by: EffCee on June 08, 2010, 07:20:57 PM
If only it was that easy with an FC grille badge

Keith
Title: Re: Horn Button/Bonnet Emblem
Post by: hawk on June 09, 2010, 08:30:50 PM
Don,

This may be of some use

http://fefcholden.org.au/forum/index.php/topic,12402.msg74774.html#msg74774
Title: Re: Horn Button/Bonnet Emblem
Post by: Maco on February 22, 2013, 10:05:49 PM
Quote from: hawk on June 09, 2010, 08:30:50 PM
Don,

This may be of some use

http://fefcholden.org.au/forum/index.php/topic,12402.msg74774.html#msg74774

I am still available to do this mod if required, just need the horn button & the chrome body.

Cheers
John
Text only | Text with Images