Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: nelgy on April 14, 2010, 08:11:37 PM

Title: lowering blocks for the panelvan
Post by: nelgy on April 14, 2010, 08:11:37 PM
Hi guys, after talking to everybody, its been decided to use lowering blocks instead of taking leafs out , to bring the back down.
Next thing, does anybody know where I can pick some up?
Glenn
Title: Re: lowering blocks for the panelvan
Post by: FC427 on April 14, 2010, 08:57:04 PM
Glenn most parts shops carry them in 1 1/2" and 2" or will get them in for you they are also on ebay or Rare Spares [American Auto's ] if you want to get them in a hurry .....FC427.....
Title: Re: lowering blocks for the panelvan
Post by: nelgy on April 14, 2010, 10:00:42 PM
So they are a universal part I assume.
Thanks
Title: Re: lowering blocks for the panelvan
Post by: customFC on April 14, 2010, 11:51:55 PM
Not universal, but easy to obtain.
You still have to specify what car and rear end they are to suit.
Regards
Alex
Title: Re: lowering blocks for the panelvan
Post by: Omalley on April 15, 2010, 02:50:08 AM
Autobarn sell them up to 3" for FC's
Title: Re: lowering blocks for the panelvan
Post by: NIFFTY on April 18, 2010, 10:21:10 AM
If you are in sydney,Iam on the northern beaches and have a 2" billet set of blocks to suit fc,if you want to try them to see if they are what you want,they are new and unused and you can have them real cheap
Title: Re: lowering blocks for the panelvan
Post by: nelgy on May 03, 2010, 05:21:42 PM
hey guys, autopro got the blocks in. 2inch worked perfectly. the car sits a treat.. when i get the time ill post a pic.
Wasnt a hard job at all
thanks
glenn
Text only | Text with Images