I assume this is simple... but. When mounting the hr xmember to FC frame, which rubbers should I use as the tit bit where the bolts come thru are different.
Rares makes the rubber mounting kit for mounting the HR crossmember to FC it has the correct rubbers needed.......FC427........
You need Rare Spares kit
"Front End kit, front end mounting rubber FE-EK with HR Xmember"
Part number FEK4A
Do they do this kit in Noelathane??
JB
They make the outrigger bush don't know about the rest ??? ??? ...FC427.....
Hi all,
What bits are in the kit?
Rusty
In the past I've used the following mix of parts;
HR bolts, nuts, spring washers and the 4 longer FC spacers.
The HR doughnut which goes between the subframe and the crossmember.
The FC upper rubber and metal retainer.
But the kit makes it all a lot easier.
Ken
fulrom suspensions in their super pro bushes (urathane material) do a fc to hr front end conversion kit . reguards fc2360
Put this kit into my HR Front end about 4 weeks ago. As for as rubber kits go very happy. A picture of the contents of the kit can be found under the FC folder in my shed at the attached link.............. 4 upper cross member bushes, 4 lower cross member bushes and a Outrigger Rubber to go in the mount below the radiator. $50 odd dollars from memory.
Bought the kit through Auto1 (Rare Spares Outlet)
http://gallery.oldholden.com/hrpremier/
don't buy the kit from spectrum rubber st marys ex peter jacksons, $50 odd from rares well over $100 from spectrum ???
kit contains 4 upper rubbers 4 lower rubbers and outrigger rubber