|
Title: ryco r4p filter assembly Post by: stapla on November 29, 2009, 07:22:32 PM Hi All,
Whats the correct method for assembly of a ryco external engine oil filter ? Does the spring assembly go the below filter element ? Maybe from bottom to top - spring, washer, claw bit then filter on top ? Does the oil restrictor go on the outlet ? Top side hole to near dissy, bottom center hole to near fuel pump ? Cheers Peter. Title: Re: ryco r4p filter assembly Post by: mcl1959 on November 29, 2009, 09:25:04 PM Peter, spring goes at the top to push the filter down.
Restrictor is on the outlet which has a short hose and goes to the hole below the filter. The inlet comes from a tee where the oil light switch is. Ken |