Print Page - HR Front END HQ

Title: HR Front END HQ
Post by: hrpremier on October 15, 2009, 11:55:35 PM

Hi Forum

I have a HR Front end I am installing into my FC Sedan for a V6 Conversion. Have been told to get HQ rotors and hubs. I have them lined up, but do I also need the HQ upper and lower contol arms to complete this setup or do they fit along with the HQ Knuckle between the HR control arms?
Thanks in advance.

Jase

Title: Re: HR Front END HQ
Post by: FC427 on October 16, 2009, 09:07:57 AM

HQ to WB stubs will fit between your HR balljoints .... NO other controll arms will fit the HD HR front end ....FC427.......

Title: Re: HR Front END HQ
Post by: fcv85l on October 20, 2009, 08:55:14 PM

and hktg

Title: Re: HR Front END HQ
Post by: EffCee on October 20, 2009, 09:32:56 PM

Quote from: fcv85l on October 20, 2009, 08:55:14 PM
and hktg

HK-T-G Stubs will fit, but not the control arms

Only HD-HR control arms will fit, Jase asked the question if HQ control arms will fit, these won't, nor will HK-T-G control arms.

Keith

Title: Re: HR Front END HQ
Post by: ratbox on October 21, 2009, 04:41:11 PM

don't exactly know what the deal was but i bought a FC once that had a HR disc front and it had H/TG top arms on it

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: hrpremier on October 15, 2009, 11:55:35 PM