Print Page - HQ-HZ Chassis Swap

Title: HQ-HZ Chassis Swap
Post by: fastjbav6 on September 23, 2009, 10:59:19 AM

Hi Guy's,
Does anyone know if a Panel van or well body ute chassis is the same length as a one ton chassis and can it replace the one ton chassis? I know the one ton chassis is different on the side just behind the cab.

Regards Seb

Title: Re: HQ-HZ Chassis Swap
Post by: FC427 on September 23, 2009, 11:01:14 AM

One ton chassis is longer won't fit the Ute or van .......FC427.....

Title: Re: HQ-HZ Chassis Swap
Post by: fastjbav6 on September 23, 2009, 11:11:06 AM

Thanks for the speedy reply. So I assume the one ton cab can be fitted to the P/V chassis, shorten the tray and brace the side behind the cab?

Seb

Title: Re: HQ-HZ Chassis Swap
Post by: FC427 on September 23, 2009, 11:23:42 AM

That is correct I have done a few like this in the 70's when it was impossible to get a one ton chassis you can leave a fair bit of overhang with the tray on the Ute Van Chassis .......FC427......

Title: Re: HQ-HZ Chassis Swap
Post by: fastjbav6 on September 23, 2009, 11:46:52 AM

Many thanks.

Seb

Title: Re: HQ-HZ Chassis Swap
Post by: mcl1959 on September 23, 2009, 07:12:56 PM

Without wishing to offend - can we please keep non FE FC related stuff off the discussion boards?

Ken

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: fastjbav6 on September 23, 2009, 10:59:19 AM