Print Page - Bosch Distributor in FC Grey motor

Title: Bosch Distributor in FC Grey motor
Post by: FCman on July 02, 2009, 11:51:52 AM

G/day all.

Can someone help me out with the Bosch part no for ignition points?

Thanks fcman

Title: Re: Bosch Distributor in FC Grey motor
Post by: FE_UTE on July 02, 2009, 08:24:02 PM

If you can find them...grab them

Bosch GB504

Cheers
Gary

Title: Re: Bosch Distributor in FC Grey motor
Post by: Trevor_B on July 02, 2009, 10:01:08 PM

Hi,
Quick google search found these - quoted as Valiant but still GB504 (also known as S4), not to bad a price:
http://www.oztion.com.au/vshops/item.aspx?itemid=4873372&shopid=5701&tid= (http://www.oztion.com.au/vshops/item.aspx?itemid=4873372&shopid=5701&tid=)

Trevor_B

Title: Re: Bosch Distributor in FC Grey motor
Post by: fastjbav6 on July 02, 2009, 11:53:43 PM

Hi All,
GB504 contact points are no longer made by Bosch.
You can use GB529 which are the same except the terminal on the end of wire is a female type and not a horse shoe shape type. Just cut it off and solder the right terminal on and lengthen wire if necessary or modify the connection that goes through the distributor body to accept GB529's as they are. In my opinion at least you still have a good quality Bosch product.
You can buy them in Champion, part # S4V but in my opinion they do not last as long as the Bosch even with a new condenser fitted.
Regards
Seb

Title: Re: Bosch Distributor in FC Grey motor
Post by: FCman on July 03, 2009, 04:58:02 PM

Yeah,thanks a lot guys,just been on to oztion,hope I can win a couple

fcman

Title: Re: Bosch Distributor in FC Grey motor
Post by: weddo on July 03, 2009, 05:49:07 PM

Try this link to the Bosch catalogue

http://www.bosch.com.au/content/language1/downloads/Ignitioncatalogue07.pdf

Most Bursons outlets are listed as Bosch distributors

regards
Weddo

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: FCman on July 02, 2009, 11:51:52 AM