|
Title: Dimensions Post by: jasonr70002 on June 27, 2009, 09:50:42 PM Hi I am after the dimensions so I can fabricate my own outrigger or modify the existing one.
cheers Jason Title: Re: Dimensions Post by: DN2168 on June 27, 2009, 10:37:08 PM Jason, Rodsracks fabricate an outrigger for $55.00. this may be an easy way out for you.
Cheers, Dean. Title: Re: Dimensions Post by: FC427 on June 27, 2009, 11:19:24 PM CRS I think still makes them also .......FC427.......
Title: Re: Dimensions Post by: jasonr70002 on June 28, 2009, 11:10:03 AM Cheers guys but I would rather fabricate my own and save money because I have heaps of steel here and all the tools to make it. If anyone has the dimensions could you please post them for me.
cheers Jason Title: Re: Dimensions Post by: mcl1959 on June 28, 2009, 09:42:30 PM The dimensions will only get you half way. You will still need to bolt the crossmember up to the car to get it in the right place. If it is not right it will stuff your caster angle adjustment ability.
Soooooo - if you have the crossmember all bolted up you can measure and make as you go so to speak. This is what I would do. The very first one I did, I hand made - I will never make another one though. It's just not worth the effort when you can just weld on a replacement off an FB EK EJ or EH. Ken Title: Re: Dimensions Post by: jasonr70002 on June 28, 2009, 10:15:21 PM Ok might try to find a replacement but not having a lot of luck. Will keep looking
cheers jason |