|
Title: dis assembly of FC stub axle & steering arms Post by: zulu on June 26, 2009, 04:33:46 PM Is there a trick to un doing the stub axle from the backing plate & steering arm ???
The long bolt that appears to thread through both the stub axle & the steering arm won't budge :P on either side assembly, the other 3 bolts on each side came out easily I've tried WD40 & whacking them, don't want to be overly zealous in case they snap off Any suggestions? Gary Title: Re: dis assembly of FC stub axle & steering arms Post by: mcl1959 on June 26, 2009, 07:06:35 PM Gary, at the bottom there are 2 bolts - One threads into the stub axle and is usually undone quite easily. The other is longer and has a nut on the end. This one is not threaded into the stub axle and is removed by giving it a good solid hit. Rust can cause this bolt to become quite stuck.
Ken |