Print Page - Insert emblem on boot

Title: Insert emblem on boot
Post by: pharlap51 on May 10, 2009, 06:12:44 PM

Can someone advise s to how I insert the Rare Spares boot emblem.

I have removed the srews holding the surround but how do I remove the lock cylinder ( I assume I need to)

Many thanks

John

Title: Re: Insert emblem on boot
Post by: mcl1959 on May 10, 2009, 08:46:33 PM

John, the lock is retained by a clip similar to the ones which hold the front door locks in. This has to be removed from inside the cavity in the boot lid

Ken

Title: Re: Insert emblem on boot
Post by: RET on May 11, 2009, 09:52:42 AM

But they're a lot more "fun" to reinstall than a door lock retainer :-\

Title: Re: Insert emblem on boot
Post by: FC427 on May 11, 2009, 10:04:46 AM

Quote from: RET on May 11, 2009, 09:52:42 AM
But they're a lot more "fun" to reinstall than a door lock retainer :-\

as RET said it can take a few goes to get it in right a little mirror helps see what is going on ........FC427........

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: pharlap51 on May 10, 2009, 06:12:44 PM