Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: spider on January 05, 2003, 05:36:45 AM

Title: Compliance plate
Post by: spider on January 05, 2003, 05:36:45 AM
 Hi to All,
              Hope everyone had a good and safe new year.
I put the the numbers into the identification form for my wifes fe special i am doing up. But there were lots of inconsistancies ???, So can anyone help me? The plate reads like this.
Body id number FE-225-35025-A
Trim Number           286-717
Paint Number         256-7698
RPO                        253-7479.   Top
Thankyou
               Spider 8)
Title: Re: Compliance plate
Post by: mcl1959 on January 05, 2003, 11:18:59 AM
Spider, I tried yours out and there is an error in the program for your colour
All your details are correct as Turquoise over Castle Grey with a Persian Turquoise and Parchment Ivory interior (same as Cat's car TC I believe)
But will need RET to check the program

Ken
Title: Re: Compliance plate
Post by: spider on January 05, 2003, 10:45:28 PM
 :)Thanks Ken  :)                      
Title: Re: Compliance plate
Post by: RET on January 06, 2003, 05:58:18 AM
Spider/Ken,

Thanks for the info - if you try again now you should get the right answers.  (I didn't have code 286 in my database).

You'll still get that warning about inconsistencies if you don't have the chassis and engine numbers, of course.

cheers
RET
Title: Re: Compliance plate
Post by: spider on January 06, 2003, 08:05:00 AM
 ;)Thanks Ret and Ken. :)
                     Cheers Spider
Text only | Text with Images