Print Page - EH and HR Diff conversions

Title: EH and HR Diff conversions
Post by: earlyholdenfan on January 29, 2009, 06:48:19 PM

I was wondering if the brakes and backing plates etc off an EH diff will fit to a HR housing?

OR

how hard is it to move the EH brake line junction to the opposite side of the housing to fit in an EK (same side as HR diff housing)?

Matt

Title: Re: EH and HR Diff conversions
Post by: mcl1959 on January 29, 2009, 07:32:06 PM

The EH plates don't fit onto the HR housing, it would be a relatively simple job to remove the tab from the diff and weld it on the other side.

Ken

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: earlyholdenfan on January 29, 2009, 06:48:19 PM