FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: freddyc on January 12, 2009, 06:12:11 PM



Title: Metal seat surrounds
Post by: freddyc on January 12, 2009, 06:12:11 PM
there is a set of metal seat surrounds on Ebay do the fit std FC sedan seats


Title: Re: Metal seat surrounds
Post by: RET on January 12, 2009, 07:38:54 PM
They can be made to fit, but don't just bolt on. The locating screw holes etc on the FC seat aren't the same as FB/EK. This has been discussed before. Do a search for "seat surrounds" and see what turns up.

cheers
RET


Title: Re: Metal seat surrounds
Post by: mcl1959 on January 12, 2009, 09:20:15 PM
The other problem is that the back section is lower than FC and if fitted to a stock FC seat it will show a large patch of white material at the back which looks ugly.
OK if you are retrimming and change the pattern of the material to suit.

Ken