Print Page - front brake hose- mount(position?

Title: front brake hose- mount(position?
Post by: ekolden on December 08, 2008, 05:05:22 AM

Hi all,
was wondering if any body can help me out with a photo of the mounting position for the front brake hose(bracket)the one on the k frame.
i had removed mine quite some time a go to install a hadfield strengthening kit,its been about 2 years so I'm buggered to what(where the correct position is to remount them.

@@@ Thanks for any help in advance,
cheers
--EK.

Title: Re: front brake hose- mount(position?
Post by: ekolden on December 12, 2008, 06:30:09 PM

bump;

Title: Re: front brake hose- mount(position?
Post by: FCOV6 on December 12, 2008, 07:59:17 PM

I removed mine as well for the CRS chassis kit and will have to make and re -fit them, i will fit the hoses to the calipers and clamp the bracket to the subframe and turn the steering lock to lock and find out the ideal position.

Title: Re: front brake hose- mount(position?
Post by: mcl1959 on December 13, 2008, 03:42:01 PM

The centre line of the hose is approx 3 cm back from the trailing edge of the crossmember, roughly centred on the subframe leg.

Ken

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: ekolden on December 08, 2008, 05:05:22 AM