Text only | Text with Images

FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: lucky13 on December 02, 2008, 10:20:53 PM

Title: stainless
Post by: lucky13 on December 02, 2008, 10:20:53 PM
Wanted LH and RH stainless gutter moldings for an FE FC full length front to back CHEERS
Title: Re: stainless
Post by: ownfc59 on December 02, 2008, 11:59:42 PM
Hi, I have a LH & RH set of stainless moulds apart from the strip that runs along the rear 1/4 panel.
PM me if interested.
Cheers,
Pete
Title: Re: stainless
Post by: mcl1959 on December 03, 2008, 03:19:35 PM
Lucky - you should say what state you are in cos these things can't be posted and would probably be damaged by a courier.

Ken
Title: Re: stainless
Post by: lucky13 on December 07, 2008, 09:43:41 PM
Hey thanks fellas I'm in Katherine NT, and I'm only after the moulds for the gutter along the roof line. They could be posted I reckon.How do I pm someone? Cheers
Title: Re: stainless
Post by: FC427 on December 07, 2008, 10:04:41 PM
Lucky13 I am pretty sure they are one piece from front to rear and would be to long for Australia Post ......FC427........
Title: Re: stainless
Post by: mcl1959 on December 08, 2008, 03:36:40 PM
Lucky 13 - to pm someone, slide the cursor over the 3 icons at the bottom left of each message until you read "personal message" Click here and this will open the pm window.

Gutter moulds are about 2m long - too big for Australia Post.

Ken
Text only | Text with Images