|
Title: Disc brakes on kingpin frontend Post by: MR59FC on October 14, 2008, 09:25:40 PM Hi guys Thinking about fitting torana discs and calipers to my kingpin front end using the Castlemaine rod shop bracket kit. Has anyone done this conversion and what do they think of it? I have a Hr diff for the rear. Want to keep the car close to original, still running grey motor but just want to upgrade brakes a bit. Thanks Title: Re: Disc brakes on kingpin frontend Post by: crashbox on October 14, 2008, 11:15:48 PM g'day
, if you are really worried about originality, put a brake booster on, if you want it to stop/steer better i would just put a balljoint disc hd/r front end/ rear end in. Title: Re: Disc brakes on kingpin frontend Post by: mcl1959 on October 15, 2008, 08:48:43 PM Used one once at H/S - vowed never to use another one!
I'm with crashbox Ken Title: Re: Disc brakes on kingpin frontend Post by: black57 on November 04, 2008, 08:11:14 PM Hi guys.
I want to keep my Grey but change the front end to a HR front end. Is there a lot to change in doing this? Obviously the outrigger, but is there anything else I need to change on the HR F/E to make the grey bolt back in? Pinky Title: Re: Disc brakes on kingpin frontend Post by: mcl1959 on November 04, 2008, 10:03:15 PM Pinky go to NSW home site and look in tech info section. Complete story on how to do this is there.
Ken Title: Re: Disc brakes on kingpin frontend Post by: black57 on November 04, 2008, 10:20:49 PM Thanks Ken
|