Hi All
I am concidering putting a tilt front on my FE van, does anyone know of anyone who does fibreglass or steel ones.
I am not going to register for street use as am just going for show.
Cheers Neil
Hi Neil,
One on Ebay at the moment:
http://cgi.ebay.com.au/Fe-Holden-Fc-Holden-Fibreglass-Front-bonnet-guard_W0QQitemZ140268546112QQihZ004QQcategoryZ29695QQssPageNameZWDVWQQrdZ1QQcmdZViewItem (http://cgi.ebay.com.au/Fe-Holden-Fc-Holden-Fibreglass-Front-bonnet-guard_W0QQitemZ140268546112QQihZ004QQcategoryZ29695QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
Seems expensive @$1200 considering there is also an EH one listed for $200.
Regards,
Trevor_B
Thanks Trevor_B
I am in West Vic so the price of fuel and the time to go get it puts it way out of reach.
Cheers Neil
Not sure who makes them, but Kev Woolard's ute looks great with a tile front, and it's steel.
The ebay fibreglass one looks interesting but it would be nicer to see it fit up to a car.
Would it need bracing to stop it from flopping about?
Cheers
Ed
Who would want to put tiles on the front of their ute ??? ;D..
at least it's steel ;) :P
Quote from: TTV6FC on September 22, 2008, 06:33:45 PM
Who would want to put tiles on the front of their ute ??? ;D..
heh.. just noticed.. for my next ride... a tiled front end.
ceramic no less.
Cheers
Ed
:D :D
Hey Ed
Are you planning to build a FC rocketship?
Regards
Alex
I believe this front was for sale on ebay as part of a complete car.
The car was sold and the new owner may be off loading the front.
I also believe that Kevin's steel front was used as the template for the mould.
That's what I hear anyways. ;)
Regards
Alex
Quote from: customFC on September 23, 2008, 02:30:12 PM
Hey Ed
Are you planning to build a FC rocketship?
Regards
Alex
Fc Rocketship would be nice ;D
I spoke to one of the guys who built Kev's tilt front and they also told me they made a very limited number of fibreglass versions, then destroyed the mould.
Cheers
Ed
I have a f/glass mould made from my steel tilt front. I also have a f/glass front sitting inside it. I have not sold anything to anybody,--- just for the record! My 2 nose-cones have been done using this mould. As I don't intend doing anymore "tilt-fronts', I guess both the mould & f/glass front could be looking for a new home. A fully steel tilt front is a major undertaking. I found out "the hard way", how to do this. Would be happy to help with advice on hinging, locking and tie-down. These items are sitting gathering dust in my shed on the North Coast of NSW. Cheers Old-Blu.
Hey Kevin
Thanks for setting the record straight.
Guess you can't always believe what your told.
Sounds like just the ticket for a FC Gasser...... ;D
Regards
Alex
Hey everyone
How about an FE WINDOWLESS GASSER
Cheers Neil
Hi Old Blu
Am going for go more than show so any thing will do.
Cheers Neil
I will never believe anything a person says about another persons car no matter who he/she is.
Kev, your steel tilt front is top quality.
Cheers
Ed
A Sceptic is born.
Hi Ed. Stories are often embellished in the re-telling. Messages get mixed, quite often by mistake. My steel tilt front WAS used to make 2 f/glass fronts. The first, I have in the shed; the second was sold with a "chop-top" coupe unfinished project. I watched the coupe being built & the deal was to make a mould from my Ute in exchange for * the mould, * the first f/glass copy * two nose cones. The coupe has since been sold on. I am unsure if it will ever see the light of day. The mods were very extensive, very expensive as well as only part completed. The mould was supposed to be destroyed! The idea being, firstly, that the work involved in building the steel tilt front needed to be experienced to appreciate the difficulties and secondly, how would you fix a price anyway? The mould was made by a prof. boat builder who specialised in f/glass yachts. He also made my glass Ute lid. When I saw the reinforcing that went into the mould, I could not bring myself to "smash it". Soooooo! It is in my shed all safe-n-sound. So, the story you and Alex were told was partly correct. I don't think I have enough years left in me to build another tilt front, so I guess it will be sold on in the future. The bottom line is this,----- every time I look @ the mould &/or the Ute, I recall with satisfaction the journey & the end result. " Here endeth the lesson" CHEERS Old-Blu.
Hey Kevin
I believe the front end for sale on ebay is the front from the chop top coupe.
I guess the new owner does want it to be flip front.
Regards
Alex
ahh the plot thickens.
Kev would you mind sharing a pic of the mould?
I'm interested in fibreglass fabrication, I'd love to see it.
Cheers
Ed
Have a look at:
http://fefcholden.org.au/forum/index.php/topic,2091.0.html
;D ;D ;D
Happy to do that Ed. I don't know how to upload pics to this
Hi Ed. I will send you a pic of the mould & you can upload it to the Forum if you wish. I have not placed pics as yet. Cheers Old-Blu.
Quote from: customFC on November 05, 2008, 11:17:55 PM
I guess the new owner does want it to be flip front.
Ooops that should have been doesn't want it to be flip front.
Kevin, if you want to send them the pic to me, I would be happy to help.
Regards
Alex