Text only
|
Text with Images
FE-FC Holden Discussion Forum
Technical Board => Modification Help => Topic started by: Glenn 'Stinky' Stankevicius on September 04, 2008, 05:32:04 PM
Title:
HR front ends
Post by:
Glenn 'Stinky' Stankevicius
on
September 04, 2008, 05:32:04 PM
If an HR front end has been modified to fit an FE/FC, would that same front end fit straight up to FB/EK or does it need modifying again?
Title:
Re: HR front ends
Post by:
FC427
on
September 04, 2008, 06:01:07 PM
Same Same .....FC427.......
Title:
Re: HR front ends
Post by:
Glenn 'Stinky' Stankevicius
on
September 04, 2008, 11:41:39 PM
Thanks FC427, bad news for my FC Sedan :'( Good news for my EK project :o
Text only
|
Text with Images