Print Page - Speedo Drive

Title: Speedo Drive
Post by: weddo on August 25, 2008, 09:14:56 AM

I have a Celica steel case in one of our FC's and the speedo won't work. The plastic gear drive that engages with the gear in the box seems to be undersize? I can put a screwdriver in the slot at the end of the shaft and turn it and it just touches the gear in the box. Any ideas? The plastic gear drive dosen't look worn.

Regards
Weddo

Title: Re: Speedo Drive
Post by: smithy on September 10, 2008, 03:10:47 PM

hi weddo, appologies in the delay ive been offline for a while.
if you havent sorted it out yet try castlemain rod shop they did have the correct tooth gear for the 5 speed which gives you the correct speedo readout.
dellow automotive may have the right gear too.

dean

Title: Re: Speedo Drive
Post by: FC427 on September 10, 2008, 03:31:06 PM

As Dean said Dellow has the speedo gears, have bought them from him before .........FC427........

Title: Re: Speedo Drive
Post by: weddo on September 11, 2008, 11:20:09 AM

Thanks Guys,

regards
Weddo

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: weddo on August 25, 2008, 09:14:56 AM