|
Title: Part # 7405761 L 7 Post by: Brad on July 02, 2008, 06:32:19 PM Hello all.
Can someone shed some light on this part # for me please? It's on a piston that is supposed to be 10 thou oversize but it's not stamped with anything but 7405761 with the L 7 underneath. I thought that all oversize pistons had the amount stamped on them 10 20 30 etc. I have measured the piston with a cheap " plastic " set of verniers and they read at just under 3 inches which I think is standard bore. Thanks Brad. Title: Re: Part # 7405761 L 7 Post by: ACE on July 02, 2008, 06:51:07 PM G'day Brad,
I just checked my master parts book and 7405761 is standard for 48,50, FJ, FE, FC. I'm not sure what the L 7 means though ??? Regards ACE 8) Title: Re: Part # 7405761 L 7 Post by: Brad on July 03, 2008, 05:49:42 PM Thanks ACE.
I was sure it's a standard piston as the measurement seems to proves . But the tool I used was probably not the best. I don't know what the L 7 is for either but has anyone seen an oversized piston that is NOT stamped with the size? ??? Thanks Brad. |