Print Page - Diff centre change

Title: Diff centre change
Post by: crossply on June 24, 2008, 07:34:40 PM

G'Day,
I'm going to do a diff centre change in the wagon to give it longer legs.
I've been told that i need to use a different uni joint because of the different yoke type.
What uni should i use? EH, HR or something else?
Thanks,
Paul

Title: Re: Diff centre change
Post by: hawk on June 24, 2008, 07:45:03 PM

Paul, i got an eh uni and also the u bolts as well
Regards ,Greg

Title: Re: Diff centre change
Post by: FB_MAD on June 24, 2008, 08:32:52 PM

Yep, any red motor 6 cyl uni joint will do.Have to use the red motor uni U bolts as well.Easy to do to change to a red motor banjo centre.Just make sure when you buy the diff centre that it is a course spline diff and not the later fine spline diff as you won't be able to get your axles to fit the fine spline centre as it is.

Not long done the same thing in my FB.Installed a 3.08 and very happy with new highway engine revs and economy.

Title: Re: Diff centre change
Post by: crossply on June 24, 2008, 10:53:50 PM

Thanks for the info guys,
Paul

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: crossply on June 24, 2008, 07:34:40 PM