Can etch primer go over body filler where it feathers out to the bare metal, or should i just use a primer?
Thanks, Glenn
I've done this before and haven't had any hassles with it...yet ;D I don't know of a reason why it can't be.
Prob not much help but by the sounds of it if there's something wrong with it I've got more to worry about than you!! ;D
Regards
JSM
Glen are we talking 1k etch or 2k wash primer ???.....FC427......
from what ive heard acids in the etch may not be compatible with acids if i use etch i usuallyturn the fan down a bit and just put one coat on the metal and dodge the bog, then i clean the gun, have a smoke and spray on the hs primer.
Thanks guys, I might try to avoid the filler as much as possible. I`m using acrylic.
Cheers Glenn
Glen Acrylic is not so bad if you get it on the polyester putty ,just use a rag with thinners on it and wipe over the putty to remove the Etch and then Acrylic prime it ......FC427........
That sounds good, thanks for the help.
Cheers, Glenn
What is the result of using etch primer (acrylic) on filler? it hasn't done anything to my paint yet?....