Text only | Text with Images

FE-FC Holden Discussion Forum

For Sale and Wanted => Auction and Trade Links => Topic started by: EJ_Dave on April 09, 2008, 06:27:10 PM

Title: WW Stromberg to suit red 6
Post by: EJ_Dave on April 09, 2008, 06:27:10 PM
[ebay]140222546713[/ebay]

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&rd=1&item=140222546713&ssPageName=STRK:MESE:IT&ih=004

Cheers,
Dave
Title: Re: WW Stromberg to suit red 6
Post by: customFC on April 09, 2008, 09:26:07 PM
Hey Dave
Is this a red 6 WW or off the later 253 (or Ford V8)?
Regards
Alex
Title: Re: WW Stromberg to suit red 6
Post by: Sideplate on April 09, 2008, 09:52:52 PM
Whats one worth one a manifold??  Ive got one and just wondering
Title: Re: WW Stromberg to suit red 6
Post by: EJ_Dave on April 09, 2008, 11:02:36 PM
I think it is for a red 6. That was the description when I bought it. The part number stamped on top of the fuel bowl reads A6 and below it -still on the raised flat bit, 4 23.

It has 51 drill main jets in each barrel as specified for 186S motors. Not sure of the Venturi size but could check if this would seal it. How can I tell the difference between a red 6 WW Stromberg and a later one for the 253? It certainly fitted my red 6 WW stromberg manifold (which sold for $86).

Cheers,
Dave
Title: Re: WW Stromberg to suit red 6
Post by: FC427 on April 10, 2008, 09:18:50 AM
While we are on the WW STROMBERG  who has seen the twin manifolds for these 2 barrels to suit red motor . A guy was selling them at Ballarat swap I took his number and then lost it .....FC427......
Text only | Text with Images