Print Page - Diff Pinion Angle?

Title: Diff Pinion Angle?
Post by: THOMMO_2 on February 25, 2008, 07:40:07 PM

Gday All
Is the pinion angle the same on early holdens, FE to HR?
If so, what is the angle?
Thanks
Jeff

Title: Re: Diff Pinion Angle?
Post by: FC427 on February 25, 2008, 07:50:32 PM

It is suppose to be the same angle as the back of the gear box if you put a straight edge on the back of the box up and down and a straight edge on the rear yolk up and down the measurement should be the same top and bottom some say it is good to vary the angle a couple of degrees so it doesn't wear the universals in the same spot but up to you ......FC427.......

Title: Re: Diff Pinion Angle?
Post by: THOMMO_2 on February 25, 2008, 08:03:34 PM

Thanks FC427
I did know the why's, I just need an angle on a standard diff.
Thanks anyway ;)

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: THOMMO_2 on February 25, 2008, 07:40:07 PM