Gents
When fitting an fb ek column to my fe and retaining the fe steering wheel do I need to use the fb/ek honey pot and blinker assay etc or will the original fe ones fit?
I do not require the column shift setup due to running a 5 speed gear box
Any help apreciated
Cheers
Haydn
Hayden I am in the middle of doing this mod at the moment, mine is a bit more complicated as I am retaining the FC wheel & gearstick, but blending it to EK hydramatic column change setup.
You should be able to retain the blinker assembly part, I changed mine because it had the auto quadrant in it, but I also changed the wiring within it to the FC wiring.
As for the honey pot, I think the hole that the wiring goes down is lower down the column so you may have to use the EK honey pot to cover it.
thanks zulu