Text only | Text with Images

FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: FATBOY on January 25, 2008, 11:30:23 PM

Title: Rear Springs rubber holders
Post by: FATBOY on January 25, 2008, 11:30:23 PM
Wanted the pieces of metal that hold the rubber insulater that have the u bolt run up each side on the rear leaf springs

regards fatboy
starting the preliminary fit up of the ute before painting
Title: Re: Rear Springs rubber holders
Post by: FC427 on January 27, 2008, 10:11:54 AM
Hi Fatboy I don't run them or the rubber insulator I bolt it all together like HQ\WB Ute's Vans and 1Toner's and that lets it all pull up hard and the U bolts don't need to checked periodically as the rubber deteriorates and squashes.Just a thought.......FC427.........
Title: Re: Rear Springs rubber holders
Post by: FATBOY on January 27, 2008, 12:20:49 PM
Thanks for the reply mark
regards fatboy
Title: Re: Rear Springs rubber holders
Post by: Harley on January 27, 2008, 12:51:46 PM
FC427 I'm not seen HQ\WB Ute's Vans set up but how do they bolt up, do they not use rubbr insulaters,
Title: Re: Rear Springs rubber holders
Post by: FC427 on January 27, 2008, 01:14:24 PM
Harley the diff sits straight on the spring if you were doing this it would require a bush to locate the diff housing on the centre bolt [I made new saddles when I fitted the Commodore diff with the location hole to suit the centre bolt size ]and then just pull the U bolts up .....FC427........
Text only | Text with Images