Print Page - Vents for FE

Title: Vents for FE - FC Vans
Post by: cruiser056 on November 26, 2007, 04:58:29 PM

Hi all,
I am having new side panels made for my FE Van and need the depth of the vents in the sides, that is the measurement of the opening of the vents. Is there anyone out there with a van that could measure this for me please?

Thanks

Michael

Title: Re: Vents for FE - FC Vans
Post by: FE_STD_WAGON on December 01, 2007, 10:00:53 AM

Hi michael,
I just measured the vent opening and it is a 1/4" or 6mm deep and the length of the vent opening is 200mm and my van is an original windowless. Hope this helps.

Regards Mick

Title: Re: Vents for FE - FC Vans
Post by: cruiser056 on December 07, 2007, 07:23:09 AM

Thanks Mick, I have all the other specs, just needed that 6 mm depth.

Thanks again

Michael

FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: cruiser056 on November 26, 2007, 04:58:29 PM