Text only | Text with Images

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: bill ford on August 19, 2007, 06:55:47 PM

Title: cross member support for aussie 4 speed
Post by: bill ford on August 19, 2007, 06:55:47 PM
i am putting an aussie 4 speed in my FC, id just like to no what kind of cross member i would need.
Any information would be gratfully appreciated

thanks Bill
Title: Re: cross member support for aussie 4 speed
Post by: customFC on August 19, 2007, 11:14:58 PM
Dellow in Sydney do a crossmember that bolts through the floor with reinforcement plates.
I have 1 in my car and works ok.
Regards
Alex
Title: Re: cross member support for aussie 4 speed
Post by: funkafide on August 20, 2007, 08:25:31 PM
i think there's one in my car (bought a wreck with no engine or box and has a hole in the floor and crosmember bolted on). but i'm wanting to go to 3spd column.. ( don't want to hijack your post though so i'll ask questions about that one elsewhere).
I'm thinking if i can't use it you coould have it depending on where you are.
Text only | Text with Images