Print Page - Tune up

Title: Tune up
Post by: pearo on April 23, 2007, 08:56:24 PM

I have a 202 red motor with conventional points in my EK and it's running a little rough. Can anyone tell me what the dwel angle as a percentage should be when setting the points.

Cheers
Rob

Title: Re: Tune up
Post by: ACE on April 23, 2007, 09:28:47 PM

Hi Rob,
Dwell Angle should be between 30-35 degrees.
Regards ACE 8)

Title: ...Re: Tune up
Post by: pearo on April 24, 2007, 08:22:51 AM

Thanks Ace I will see if this makes a difference. I have been thinking I should instal an electronic distributor and be done with it.

Thanks again

Rob

FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: pearo on April 23, 2007, 08:56:24 PM