Print Page - Question regarding wiper pivots

Title: Question regarding wiper pivots
Post by: peterwmh on March 26, 2007, 08:42:47 AM

Hi all,

I have a pair of wiper pivot spacers that I'm not too sure what they're off. I know FB EK ones have a small grub screw, these ones don't, could they be FE FC or maybe FX FJ?? Sorry the photo isn't too great ::)Thanks in advance. Peter

(http://i6.photobucket.com/albums/y247/peterwmh/IMG_1115.jpg)

Title: Re: Question regarding wiper pivots
Post by: RET on March 26, 2007, 11:24:37 PM

FE-FC also have the grub screw for fitment of original washer kit.

Do these ones have a part number on them?

cheers
RET

Title: Re: Question regarding wiper pivots
Post by: peterwmh on March 27, 2007, 07:36:37 AM

Thanks RET well that rules out FE FC also!! Maybe they aren't even from a Holden!! They don't have a part number on them, in fact they have no writing at all!! But some further info on them, the hole is 16mm in diameter and has what looks like a locating keyway inside. The straight base is 30mm across. Hope that helps with the ID puzzle.

Regards

Peter

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: peterwmh on March 26, 2007, 08:42:47 AM