Print Page - Brake for Clutch Master Cyl

Title: Brake for Clutch Master Cyl
Post by: Digger on September 22, 2002, 06:14:15 AM

I'm changing from a trimatic auto gear box to a five speed toyota manual, could some one tell me if I can use the standard brake master cylinder for the clutch.
To be honest I can't remember If I can !

Thanks Steve.

Title: Re: Brake for Clutch Master Cyl
Post by: mcl1959 on September 23, 2002, 08:30:02 AM

There is a valve in the bottom of the brake master cylinder which must be removed before you can use it as the clutch master cylinder.
Otherwise it is OK.

Ken

Title: Re: Brake for Clutch Master Cyl
Post by: Digger on September 23, 2002, 09:42:05 AM

Thanks Ken :D

I new I had used one before, but it was years ago and couldn't remember what I did to use it.

Thanks again, Steve.

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: Digger on September 22, 2002, 06:14:15 AM