Hey All,
Was wondering if anyone could help me with any info on twin turbo V8's.
Any links or web sites that youn know of that i could look at.
Cheers Dags. ;)
Hi,
These guys below are pretty much upto date with twin turbo kits...
Cheers
AL
http://www.ls1turbo.com.au/ttspecs.htm
http://www.turbofast.com.au/
http://www.hp-f.com.au/
you better check with your engineer what size engine you can fit with a v8 becuase it is more restricted with turbo.
It might be squeezy with FE-FC inner gaurds but these days you can probably stick the turbo at the back of the car.
Dags,
ive looked into it a little bit.
was thinking a stroked 253 ( to 310) with 2 huffers.
be prepared for the HUGE cost for the motor alone.
forged pistons, conversion to 4 bolt mains, head work etc.
then whack on more for some decent water cooled, roller bearing huffers.
just cos that aint enough a fair amount of head scratching for the exhaust, intercoolers etc.
you prolly need to cut out the inner guards completely to get the space, and then introduce a bit of structural issues as a result.
i'd love to see it done
;D
if i were to start over, I'd go a turbo, but for now, the numbers and re-engineering doesnt add up, especially when a 355 stroker is one step away.
Cheers
Ed
Thanks Guys,
Yeah I know it would be a big task and $$ to :o.
I would love to see it done to Ed ;)
Cheers Dags.