|
Title: FE Wheel Well Post by: plumer46 on January 29, 2007, 05:19:01 AM G'Day
Almost fininshed body repairs on my FE Ute, I am repairing all the dents in the wheel wells, I have noticed there is a flat area in the rear of both wells at the junction of the tray and inside side of the wells. Is this normal or has there been a big hit in this area. Both wells look very similar in this particular spot. Regards John :) Title: Re: FE Wheel Well Post by: Brad on January 30, 2007, 10:08:01 AM Hello John
If you send me an e- mail pic of the area in question I can e -mail a pic to you of the same area ,as my van is very straight and original in all areas of the wheel well /arch inside and out. There is a flat area from factory on the rear of the wheel arch looking from the tailgate to the front. It's low on the inside of the arch and down near the floor of the ute / van. Brad. |