|
Title: FREE FC BODY SECTIONS.!!! Post by: fe hotrod on January 16, 2007, 03:28:29 AM ;)Im cutting up a FC body shell all i need is the roof,if any body needs some other bits or sections let me know ASAP cause it will be going to simsmetal soon im in hoppers crossing vic,cheers jamie,0408851404
Title: Re: FREE FC BODY SECTIONS.!!! Post by: SRVLIVES on January 16, 2007, 03:44:07 AM hey Jamie,
Could do with the section immediately behind the passenger rear wheel if it's not knackered? Title: Re: FREE FC BODY SECTIONS.!!! Post by: Rabbitoh on January 16, 2007, 06:06:26 AM Jamie,
Is the front subframe assembly (including the front tie member under the radiator) usable? Also if it is a sedan, I need the boot opening (weatherseal holding) channel. Title: Re: FREE FC BODY SECTIONS.!!! Post by: NES304 on January 16, 2007, 06:32:24 AM You didn't happen to keep the rods for the hood lining? If you did can I grab em and the old material (with the rods in it) cheers
Title: Re: FREE FC BODY SECTIONS.!!! Post by: minifcvan on January 16, 2007, 09:26:51 AM why do you only need the roof ??? ???(hehehe) sounds like theres a plan going to happen hmmmm....... ::) ::) ::) ::) ::)
Title: Re: FREE FC BODY SECTIONS.!!! Post by: fe hotrod on January 16, 2007, 11:57:18 AM ;)Shane the bit behind the rear wheel,lower quarterpanel has rust,!!!Rabbitoh it didnt come with a subframe as im chasing a good one myself and how much of the seal channel do you need and where??and nes 138 ive pm,d you!!mmmmmm wonder why i would need a fc roof??something a bit different coming up!!i will post some pics, but this is a long term project cheers jamie ;)
Title: Re: FREE FC BODY SECTIONS.!!! Post by: SRVLIVES on January 16, 2007, 08:47:16 PM Quote ;)Shane the bit behind the rear wheel,lower quarterpanel has rust,!!! Of course...... had to ask though. Let me think, two roofs (rooves? ;) ) one car......mmmm, chop, chop mate Title: Re: FREE FC BODY SECTIONS.!!! Post by: Rabbitoh on January 17, 2007, 01:30:45 AM Quote ;)Rabbitoh ...... how much of the seal channel do you need and where??;) Jamie, will let you know the extent I need, tonight. thanks, Title: Re: FREE FC BODY SECTIONS.!!! Post by: Just40 on January 18, 2007, 03:48:00 AM buddy could you cut this bit out on the drivers side,my mate need from the ridge to just past the bolt holes maybe 2 inch past and about 16 inches wide.
but must be drivers side..... (http://i8.photobucket.com/albums/a19/just40/fe%20holden/this.jpg) Title: Re: FREE FC BODY SECTIONS.!!! Post by: fe hotrod on January 18, 2007, 10:51:23 AM ;)Just 40 im sorry but i cut through this section as i wanted the pillars then i cut the car in 2 bits right through this section !!it was rust free too,about 1 day too late!!cheers jamie
Title: Re: FREE FC BODY SECTIONS.!!! Post by: Rabbitoh on January 19, 2007, 02:05:22 AM Jamie,
I need as much of the 2 sides (along tops of quarter panels) and complete lower edge of the boot seal channel as you can spare (and is not holed through with rust). Thanks, R. Title: Re: FREE FC BODY SECTIONS.!!! Post by: Just40 on January 19, 2007, 07:21:41 AM it,s all good,he will find one somewhere.
thanks anyway. Title: Re: FREE FC BODY SECTIONS.!!! Post by: fe hotrod on January 19, 2007, 08:25:48 AM ;)As it stands now unless you live in melbourne and come with your own grinder or gas axe i will not be cutting out any more bits of this shell exept for the blokes that i have said i will,as ive been flooded with requests,and im meant to be on holidays relaxing (yeah right)so because i dont want to send a fc shell all over australia in a thousand patch panels!! this is it!! unless you come yourself!!cheers jamie
Title: Re: FREE FC BODY SECTIONS.!!! Post by: TAYZ on January 19, 2007, 01:01:56 PM What can i have ..............LOL
tayzzzzzzzzzzzzzzzzzz |