Print Page - Oil Filter Connection to Grey Motor

Title: Oil Filter Connection to Grey Motor
Post by: graham_fuller on September 14, 2002, 04:41:56 AM

Where does the side pipe get connected as I can't fit it to the oil pressure switch point as I have a Wilsonia fitted there as well? Any clues.
Thanks, Graham

Title: Re: Oil Filter Connection to Grey Motor
Post by: EJ_Dave on September 14, 2002, 05:53:56 AM

Graham,

at the oil pressure sender is the right place to connect. The only solution I can think of is to get another T piece.

David

Title: Re: Oil Filter Connection to Grey Motor
Post by: FE_225 on September 14, 2002, 10:40:42 AM

Hi Graham
You can get an adaptor for this. It screws into the oil pressure switch hole and you connect the Wilsonia to the end of the adaptor and the filter hose screws into the side of it. You should be able to get it from Repco.
Hope this helps.
Cheers
Tony

Title: Re: Oil Filter Connection to Grey Motor
Post by: mcl1959 on September 14, 2002, 11:26:35 AM

Graham, I've got one of these special T pieces. It has 3 holes oin it - 1 for the oil sender, one for the Wilsonia and one for the filter. If you have trouble getting one give me a call.

Ken

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: graham_fuller on September 14, 2002, 04:41:56 AM