Print Page - sill panel's.

Title: sill panel's.
Post by: COL58FE on November 30, 2006, 11:51:03 AM

g'day,
just need info about sill panel's,
are they all the same for fe/fc/fb/ek
all body style's.
col. ::)

Title: Re: sill panel's.
Post by: collecta on November 30, 2006, 12:54:12 PM

Hi Col,
as far as im aware the sedan and wagon genuine sills are the same and ute and van are alike, as the sedan/wagon have the four door openings and the van/ute have just the two. I have a nos sedan one i want to make fit a van.

cheers
Scott

Title: Re: sill panel's.
Post by: mcl1959 on December 08, 2006, 08:21:54 AM

Actually the sills are the same right across the board. If you look carefully inside the rear quarter on a ute you will see the place where the scuff plate is attached to where the rear door would be. The ute and van rear quarter panel extends down and is spot welded to the sill panel on the edge of the door opening.

Ken

Title: Re: sill panel's.
Post by: collecta on December 14, 2006, 11:31:05 AM

Thanks for that explanation Ken.

cheers
Scott

FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: COL58FE on November 30, 2006, 11:51:03 AM