Text only | Text with Images

FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: NES304 on November 02, 2006, 09:52:47 AM

Title: Light Switch in Dash
Post by: NES304 on November 02, 2006, 09:52:47 AM
I'm chasing a switch that works (I have three that don't), shaft and button not essential
cheers
Title: Re: Light Switch in Dash
Post by: craiga on November 02, 2006, 02:07:07 PM
Bend back the tabs carefully, remove the top cover, clean the contacts, and refit the cover. These are an easy fix, and most of them will have dirty contacts after 50 years of service/inactivity.

I have used a NOS unit, and it still needed cleaning.

Good luck.

Craig.
Title: Re: Light Switch in Dash
Post by: RET on November 02, 2006, 10:23:49 PM
There's some good stuff on rejuvenating light switches here (http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=howto;action=display;num=1091145598) and here (http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=howto;action=display;num=1147339622;start=2).

cheers
RET
Title: Re: Light Switch in Dash
Post by: NES304 on November 03, 2006, 11:36:31 AM
cheers
Text only | Text with Images