FE-FC Holden Discussion Forum
May 15, 2024, 02:49:57 AM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
: The FE-FC Holden Car Club of NSW are proud to host the
19th FE-FC Holden Nationals
. Check out the
announcement video
for more.
Home
Help
Search
Calendar
Login
Register
FE-FC Holden Discussion Forum
>
Technical Board
>
General Technical
(Moderators:
RET
,
Glenn 'Stinky' Stankevicius
,
gp
) >
Control arm location spacer
Pages: [
1
]
Go Down
« previous
next »
Add bookmark
|
Print
Author
Topic: Control arm location spacer (Read 2152 times)
Fraze
Full Member
Offline
Model: FC
Posts: 202
Control arm location spacer
«
on:
November 20, 2018, 07:23:45 AM »
0
Does anyone out there have the width of the two conrol arm (wishbone) location spacers - upper and lower. These are part numbers 3A5 upper and 3A6 lower. Thanks, Fraze
Logged
fcwrangler
nsw-club
Guru
Offline
Model: FC
Posts: 1257
JIM-- Gilead NSW
Re: Control arm location spacer
«
Reply #1 on:
November 21, 2018, 03:45:45 PM »
0
Hey Fraz, I did my front end a few weeks ago, if you haven’t pulled it apart, I measured the distance from the bush face to the inside edge of the control arms. I found that an old brake shoe was close in size so I cut the end off the shoe and cut it down to suit. The thick end of the shoe was wide enough for the bottom arm and the flat section above the end that goes into the wheel cylinder was big enough for the top arm. From memory the top was around 20-24 mm and the bottom was 40-44 mm.
Jim
Logged
on the seventh day: God Made Holden
Pages: [
1
]
Go Up
Add bookmark
|
Print
« previous
next »
Share this topic...
In a forum (BBCode)
[url=http://forum.fefcholden.club/index.php?topic=27279.0]Control arm location spacer[/url]
In a site/blog (HTML)
Control arm location spacer
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> General Board
=> FE-FC Holden Nationals
===> 2020 - Wangaratta - 18th FE-FC Holden Nationals
===> 2012 - Perth - 14th FE-FC Nationals
=> Events, Shows etc
-----------------------------
Technical Board
-----------------------------
=> Restoration Help
=> Modification Help
=> General Technical
-----------------------------
Galleries
-----------------------------
=> Members' FEs and FCs
===> Members' Other Vehicles
=> Project Cars - FEs and FCs Under Construction
===> Members' Other Vehicles Under Construction
=> Members' Completed FE-FC Projects
===> Completed Projects - Other Vehicles
=> Unreal Cars - Members' Artwork
=> Little Cars - Members' Model FEs and FCs
=> Original Advertisements, Brochures
=> Other Images
-----------------------------
For Sale and Wanted
-----------------------------
=> Cars For Sale
=> Cars Wanted
=> Parts For Sale
=> Reproduction Parts
=> Parts Wanted
=> Other Stuff For Sale
=> Other Stuff Wanted
=> Auction and Trade Links
Loading...