FC moulding clips

[FCOV6]

I'm looking at a set of side moulding trim clips on ebay from sparescity, anyone used these and is $90 a reasonable price ?

thanks,
Nick.

[Glenn 'Stinky' Stankevicius]

Sounds like a lot for a bunch of clips, what's actually in the kit?
For the few bits and pieces I needed, I either cobbled them together from other hardware or purchased the specialised clips from Crash Supplies (SA company).

[FCOV6]

This is the set - http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=120307227035&_trksid=p3907.m32&_trkparms=tab%3DWatching

 I think it seems reasonable as i dont really want to go to RS and go thru piece by piece what i need, prefer to replace the lot in 1 go.

[Glenn 'Stinky' Stankevicius]

40 pieces for $100 delivered 
Give your local Rares a call and see if they sell a kit, or even better, they list all the bits on the auction so you have a list to give to Rares.

[FCOV6]

40 pieces for $100 delivered 
Give your local Rares a call and see if they sell a kit, or even better, they list all the bits on the auction so you have a list to give to Rares.

 Good thinking, i just re read the add and they say not all clips supplied.

[FCOV6]

40 pieces for $100 delivered 
Give your local Rares a call and see if they sell a kit, or even better, they list all the bits on the auction so you have a list to give to Rares.

 Found out this is a RS kit and from RS is $94 as opposed to $89.

[les]

Found out this is a RS kit and from RS is $94 as opposed to $89.

The one on ebay is a Rare Spares kit , If you are a club member you get a discount which would bring it below $89.00