FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: Effie C on April 12, 2003, 05:59:46 AM



Title: Radio Fitting
Post by: Effie C on April 12, 2003, 05:59:46 AM
Hello All
Does anyone have the fitting instructions for an airchief radio into an FC?
Where do all the bits go? I know the radio fits in the centre somehow and the speaker goes behind the grille but where does the thrid box go?
Thanks
John M


Title: Re: Radio Fitting
Post by: 59er on April 12, 2003, 09:24:35 AM
Hi, I just put mine in not too long ago. Ken Mclean sent me the original instructions. I have the hybrid model part transistor-part valve radio. I'm not sure what you mean by third box?. There should be a small box attached to the top of the radio unit. Do you have the attaching brackets. Ken made mine for me and they were perfect. PM Ken if you need these he may help you out, I'm pretty sure he would be busy for a while with the Nationals coming up.... I could copy the fitting instructions for you if you like. There very in depth. They also tell you how to fit the speaker and aerial.. PM me if you would like these. Regards Kevin....


Title: Re: Radio Fitting
Post by: Effie C on April 14, 2003, 01:02:52 PM
Kevin any and all info greatly appreciated. The third part is a box attached by wiring into the back of the radio part which bolts to the dash.
Unsure exactly where it is meant to be attached under the dash.
Thanks
John M


Title: Re: Radio Fitting
Post by: Sarge on April 14, 2003, 06:54:47 PM
Hi Kevin
           I too find myself in simailer postion. Could I trouble you for the same instructions.


Regards  Mark.


Title: Re: Radio Fitting
Post by: RET on April 27, 2003, 04:35:22 AM
I've got the fitting instructions, and as soon as I have my laptop screen problem fixed, I promise I will scan them and make them available to all.

cheers
RET


Title: Re: Radio Fitting
Post by: Effie C on April 28, 2003, 02:26:32 AM
Thanks Ret