Show Posts
|
Pages: 1 2 [3] 4 5 ... 40
|
50
|
Technical Board / Restoration Help / Re: Rear Springs
|
on: November 18, 2022, 06:32:32 AM
|
Ken ..I assume you have checked all the possible points where things can fail or change ... shackle rubbers crumbled , ubolts and flat rubbers moved , spring hanger rotated . front eye bolt rusted of where it fits .cracked leaf...there is a measurement you can check when you work on springs to be assured you have it all set correctly ..in the back of manual ..check that first both sides ..Vern .
|
|
|
56
|
For Sale and Wanted / Parts Wanted / Re: rotor button
|
on: October 08, 2022, 07:21:16 AM
|
Nick ..thanks , i'll take that one also , as a spare is always handy ..I have friends going to and from Port all the time , is it ok if I have someone collect from you ? or if you would rather post , i'll pay post , send your reply via PM if that suits you ,or can call me 0405 703 413 ..Vern ..Thanks again
|
|
|
58
|
For Sale and Wanted / Parts Wanted / Re: rotor button
|
on: October 06, 2022, 08:05:32 AM
|
Thanks for thinking of me Errol ..its easily done isn't it ...bugger ... I have drilled a hole in line with the broken lug and put a short fat screw in there , it is a bit loose in the slot in the dissy shaft but engine runs well enough for display , we feel we can improve on that even more ..so ill be asking for all the old busted buttons soon ...keep well Vern .
|
|
|
59
|
For Sale and Wanted / Parts Wanted / Re: rotor button
|
on: October 05, 2022, 10:17:47 AM
|
Awh !!!!! come on fellas , someone out there must have a spare rotor button , I built a display engine for the museum at fagan park , and unbeknowns to me the lifting sling dislodged the dissy cap , so when we hit the starter it sheared the little drive lug off up inside the button ..just a good workable second hand will do , i'll pay for it and post if not near Dural area ...Vern ..
|
|
|
|