FE-FC Holden Discussion Forum
May 18, 2024, 01:29:14 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: blue motor electronic dissy into grey motor  (Read 9583 times)
thecanoeguy
Junior Member
**
Offline Offline

Model: FC
Posts: 26


View Profile
« on: April 22, 2015, 09:27:51 AM »
0

hello guys
can a blue motor dissy be modified to slot into a grey
thanks dave
Logged
hsv-001
Senior Member
****
Offline Offline

Posts: 909


View Profile
« Reply #1 on: April 22, 2015, 07:44:48 PM »
0

You should be able to get an electronic set up for the original dizzy . A guy borrowed one off me some 20 years ago and never returned it . Haydn
Logged
GreyFC
Full Member
***
Offline Offline

Model: other Holden
Posts: 163



View Profile WWW
« Reply #2 on: April 22, 2015, 10:04:46 PM »
0

They can and have been.  I will.find that picture for you tomorrow

This is mine it is a XE Falcon electronic dizzy modified.to suit grey.



Logged

hsv-001
Senior Member
****
Offline Offline

Posts: 909


View Profile
« Reply #3 on: April 23, 2015, 06:42:49 AM »
0

That's cool , I love it when I can learn new stuff . Cheers Haydn
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #4 on: April 23, 2015, 09:16:11 AM »
0

The Vic club has sold dozens of grey electronic conversion kits to our members over the years. We imported the kits from the U.S. I believe.  It was such a neat conversion that it could not be detected even on a stock engine.
We haven't had them in stock though now for quite a few years. I think they were Pertronic brand?

Ken
Logged
Not Happy Jan
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 947


Aussie adventure


View Profile
« Reply #5 on: April 23, 2015, 12:03:31 PM »
0

I bought a couple from Maco a few years back.I'm sure he still  is selling them.
Nick
Logged

You can never have too many!
Port Macquarie NSW
Maco
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 960



View Profile
« Reply #6 on: April 23, 2015, 08:35:09 PM »
0

I bought a couple from Maco a few years back.I'm sure he still  is selling them.
Nick

Still have some available, thanks for the heads up Nick.

John
Logged

Better in Green
fcwrangler
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 1257


JIM-- Gilead NSW


Jim Tuckwell
View Profile
« Reply #7 on: April 23, 2015, 09:22:45 PM »
0

John, pm sent
Jim
Logged

on the seventh day: God Made Holden
DJ
Guru
*****
Offline Offline

Model: FC
Posts: 1405



View Profile
« Reply #8 on: April 24, 2015, 11:31:18 AM »
0

I'm curious John.
What are these units you have?
Dave.
Logged

Dave
0417 270 315
Trevor_B
vic-club
Senior Member
****
Offline Offline

Model: FC
Posts: 377


Melbourne VIC


View Profile
« Reply #9 on: April 24, 2015, 03:02:30 PM »
0


Hi guys,
If you want more background on the Pertronics install and other related discussions then check out this thread (and some of the other links within that thread).

Grey motor electronic distributor

To see the install check out this link http://www.mbzponton.org/valueadded/maintenance/ignitionpert/ignitionpert.htm - yep, it is on a Mercedes but they use the same dissy.

Couple of things, there is also another manufacturer that sells a similar unit (I think it is by Bosch) that is basically the same. Also, the units really just replace the points/condenser. It does not significantly improve performance. Some people have reported a small increase in power and most agree that their car starts better. Best thing for me is not having to worry about points  Smiley
Trevor_B
Logged

FC Sedan, Ute & Wagon .... only a Panel Van required to make the set
Harv
Guru
*****
Offline Offline

Model: other Holden
Posts: 1321


View Profile
« Reply #10 on: April 24, 2015, 04:52:47 PM »
0

I took a good look at the technical side of the Petronix units over on the "other forum":
http://www.fbekholden.com/forum/viewtopic.php?f=25&t=20727
(it was supposed to be a magneto thread, but I got distracted  Roll Eyes).

Agree that most people will see little improvement in performance, though easier starts and less maintenance.

Cheers,
Harv (easily distracted appreciator of fine ignition products).
Logged
hsv-001
Senior Member
****
Offline Offline

Posts: 909


View Profile
« Reply #11 on: April 25, 2015, 12:39:32 PM »
0

Ok , can I get some advice .I need advice on changing from petronix with Fireball XR 700 ignition module to new after market commodore electronic dizzy and ignition module  .I get the three wires into the module ,red+ yellow - and black to ground but there is three wires returning to the dizzy ,black, white, grey ,where as the commodore dizzy has only a red wire and a black wire . I think the petronix and the fireball were as a set . Anybody? Cheers Haydn
Logged
Maco
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 960



View Profile
« Reply #12 on: April 25, 2015, 03:10:43 PM »
0

I'm curious John.
What are these units you have?
Dave.

Pertronix for a grey motor Dave.

John
Logged

Better in Green
DJ
Guru
*****
Offline Offline

Model: FC
Posts: 1405



View Profile
« Reply #13 on: April 25, 2015, 03:23:54 PM »
0

Pertronix for a grey motor Dave.
John
Thanks John, wasn't sure. PM sent.
Logged

Dave
0417 270 315
thecanoeguy
Junior Member
**
Offline Offline

Model: FC
Posts: 26


View Profile
« Reply #14 on: April 27, 2015, 08:41:29 AM »
0

hello John,
could you give me the details of the kit from you , i will buy one , I have a stock EJ (apparently from engine number) motor in my  FC ute ,I bought the ute as is , and the engine has new paint, but never been ran in car, no exhaust or leads so don't really know if been reconditioned or just painted, can't be asked mucking about with points to get her running ,
Cheers Dave
Logged
Maco
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 960



View Profile
« Reply #15 on: April 27, 2015, 08:55:44 AM »
0

hello John,
could you give me the details of the kit from you , i will buy one , I have a stock EJ (apparently from engine number) motor in my  FC ute ,I bought the ute as is , and the engine has new paint, but never been ran in car, no exhaust or leads so don't really know if been reconditioned or just painted, can't be asked mucking about with points to get her running ,
Cheers Dave

You have a PM.
John
Logged

Better in Green
thecanoeguy
Junior Member
**
Offline Offline

Model: FC
Posts: 26


View Profile
« Reply #16 on: April 27, 2015, 06:17:29 PM »
0

thanks John
can't wait to get the old girl fired up now
dave
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.036 seconds with 21 queries.