|
Title: Seat Belts Again Post by: KFH on July 18, 2010, 06:25:22 PM I am considering putting recoil belts in the front of the car. I am thinking of cutting an opening on the inside of the bottom of the B pillar and mounting the bottom plate there and also feeding a plate up to the top section. This will let me get away with one opening. What I wish to know is it possible to get a 3" x 2" x 3mm plate with a 7/16" nut welded on the back of it threaded past the metal work that supports the rear door hold open spring. Has anybody done this?
Keith |